Ready to roll

Well, the wheels are anyway.
Rebuilt courtesy Hughy of Beamont Hill Darlington.

Actually completely replaced as old ones were shot.  Spokes corroded into the rim.  So here is the front wheel - ready to roll!

On the case

June 6th 2011
Casings back from Les at Vortex

Like new

Shame there's nothing in there..........

Case solved

Gearbox and engine casings emptied of innards.

Off to Les for the vapour treatment
Pics for before/after comparison, watch this space!

Out of the box

April 12th
Gearbox disassembled.

No real problems, no major notes for reassembly.
One of the gear dogs looks pretty worn.

Can't get rid of the whiff of EP90 on my hands!

Moto Guts Out

 Pre dis-assembly in 2007
Still a looker despite the oil and rust



It's been a basket case for nearly four years now, in the last few weeks have finally made a start.

April 11th  2011

Camshaft, crankshaft, and main bearings

The throbbing heart of the Beast

After recent breakthrough removal of second spark plugs, releasing access to the recessed cylinder head nuts, heads barrels and pistons came off.  Looked pretty coked up in there, definitely too rich.  Made most of today's weather and removed followers and camshaft.  Followers a bit pitted, cam looks worn but not on lifting surface.  Crankshaft also came out.  Used float in crank to knock bearing housing out, this is a tight fit (last rebuild back in '84 I put it in the freezer to get it back in).  Crank and bearings look good.  See what Ian B thinks.   Engine case now ready for the vapours.  Next job, dismantle gearbox and maybe drive shaft housing